Do you really need an electric panel upgrade to run your AC or heat pump?
A recent Washington Post article shines a light on a common (and expensive) recommendation many homeowners hear when they want to add or update an air conditioner, heat pump, induction range, electric dryer or EV charger: upgrade the electrical panel, often to 200 amps, at a cost of $4,500 to $13,000 or more.
The standard approach behind this recommendation is to add up the nameplate maximum ratings of every appliance in the house and assume they all run at full power at the same time. That method is conservative by design, but real-world measured peak demand is usually much lower. The article notes that many homes with existing 100-amp panels already have sufficient capacity for these loads, and that the money would frequently be better spent on buying efficient equipment in the first place rather than on a panel upgrade that may not be necessary.
Research and utility data cited in the piece and related reporting show that peak usage is often well below the calculated nameplate totals. In one example, a home on a 100-amp panel peaked at less than 20 amps. Broader analyses have found that a large majority of homes with 100-amp panels have room for additional appliances without an electrical service upgrade.
However, there are other issues to consider.
Even when a full panel upgrade isn't required, the starting current (locked rotor amps, or LRA) on an AC or heat pump compressor can still create potential problems. That brief inrush of current when a large appliance starts can stress an older electrical panel, trip breakers or make it difficult to run the equipment on a backup generator.
Soft starters address exactly that part of the load. By reducing the inrush current on the compressor, they lower the peak starting load for the panel (or generator.) The result is less stress on the existing electrical service and a much better chance of successfully starting the AC or heat pump on a generator or on a lower-capacity panel.
This pairs naturally with the main takeaway from the Washington Post reporting: many homeowners may not need the costly panel upgrade in the first place. For those who already have adequate capacity, a soft starter further reduces the starting stress on that capacity and expands backup-power options. Installing one is a practical, lower-cost step that makes high-start-current equipment easier to operate on the electrical system that’s already in the house.
The full Washington Post article is here: https://www.washingtonpost.com/business/2026/11/09/people-are-paying-thousands-home-upgrade-thats-often-unnecessary/



Comments